Careva Harness System

The Careva postural belts are very helpful if you need extra support when seated in a vehicle seat or in a wheelchair.  They provide a correct seating position to allow a safe use of a seat belt. The belt system comprises a spinal belt which is fastened vertically over the backrest. The postural belt is then installed in the grooves of the spinal belt.

Remember that when in a vehicle you should always use the Careva postural belt system together with the vehicles standard seat belt.

The Careva harness system gives good support and prevents the person falling forwards or to the side. It can be fitted in all vehicles with an opening between seat base and back (this includes child seats and wheelchairs).  It can be fitted to both front and back seats (however not in fixed rear seats, these require special adaption).

Careva Combi kit

The Combi Harness is a combination of a Shoulder Harness and a Pelvic T-belt.  The shoulder straps are fastened on the front rather than the side as the standard Shoulder harness.

Careva Spinal belt

A Spinal Belt constitutes the foundation for the other parts of the system and is always fitted first. Place the belt around the car seat and secure it at the back of the seat. The belt is adjustable, adjust until safe.

Careva Pelvic belt

The pelvic belt is used to prevent people from sliding forwards when sitting, or to keep very active passengers in place during travel.

Thoracic belt

The circumference round the chest determines the length of the belt. The Thoracic Belt is used to position the upper body and prevents the person falling forwards or to the side.

Shoulder harness

The Shoulder Harness is used in the same way as the Thoracic Belt to fix the upper body and to prevent the person falling. The belt offers greater support for the shoulder and uses buckles to secure at the side.

< Back